View Full-Size Image
Design of anchorages in concrete
fib Bulletin No. 58
Title: Design of anchorages in concrete.
Category: Guide to good practice
Format approx. DIN A4 (210x297 mm)
Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology.
fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures.
fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.
Follow us on YouTube
Case Postale 88
Office GC A2 424
at the Swiss Federal Institute of Technology Lausanne (EPFL)