Structural Concrete
Contents for Volume 8 (2007)

No. 1, March 2007 - Contents

1. Editorial
   Luc Taerwe, Editor
   
   
2. Design model for socket base connections adjusted from experimental results
   R. M. Fernandes Canha, A. L. H. de Cresce El Debs and M. K. El Debs
   Abstract
   
   
3. The effects of the cooling rate on the residual properties of heated-up concrete
   R. Kowalski
   Abstract
   
   
4. Effect of admixtures on fresh grout and two-stage (pre-placed aggregate) concrete
   A. Nowek, P. Kaszubski, H. S. Abdelgader and J. Górski
   Abstract
   
   
5. Integral abutment bridge concept applied to the rehabilitation of a simply supported concrete structure
   B. Briseghella and T. Zordan
   Abstract
   
   
6. Metallic fabric jackets: an innovative method for seismic retrofitting of substandard RC prismatic members
   G. E. Thermou and S. J. Pantazopoulou
   Abstract
   

No. 2, June 2007 - Contents

1. Editorial
   H.R. Ganz, fib President
   
   
2. Shear strength in the new Eurocode 2. A step forward?
   A. Cladera and A.R. Mari
   Abstract
   
   
3. Output-only dynamic testing of bridges and special structures
   Á. Cunha, E. Caetano and F. Magalhães
   Abstract
   
   
4. Shear and torsion in prestressed hollow core units: finite element analyses of full-scale tests
   H. Broo, K. Lundgren and B. Engström
   Abstract
   

No. 3, September 2007 - Contents

1. Editorial: Thoughts about existing structures
   G. Mancini, Past President fib
   
   
2. Editor's note
   L. Taerwe, Editor
   
   
3. Cost optimisation of lattice-reinforced joist slabs using genetic algorithms
   V.C. Castilho and M.C.V. Lima
   Abstract
   
   
4. The use of prestressed concrete piles to support integral abutments
   E.G. Burdette, S.C. Howard, J.H. Deatherage and D.W. Goodpasture
   Abstract
   
   
5. Aisle-width considerations in ground-floor slabs
   A.A. Abbas, M.N. Pavlovic and M.D. Kotsovos
   Abstract
   
   
6. Modelling bond strength of corroded plain bar reinforcement in concrete
   G. Xu, J. Wei, T. Tan and H.Q. Liu
   Abstract
   
   
7. Serviceability model of corroded reinforced concrete based on the CEB-FIP model code
   A. Castel, Th. Vidal and R. François
   Abstract
   
   
8. The dynamic shear capacity of concrete structures
   A. Ansell
   Abstract
   

No. 4, December 2007 - Contents

1. Editorial
   J. Walraven, Past President, fib, and Chairman, SAG5 New Model Code
   
   
2. Concrete members with plate reinforcement: mechanical bond analysis
   T. Ulaga and T. Vogel
   Abstract
   
   
3. Prestressed CFRP laminates for flexural strengthening of reinforced concrete beams
   P. França, A. Costa and J. Appleton
   Abstract
   
   
4. Behaviour and capacity of CFRP-confined concrete cylinders subjected to monotonic and cyclic axial compressive load
   V. Valdmanis, L. De Lorenzis, T. Rousakis and R. Tepfers
   Abstract
   
   
5. The Svinesund Bridge
   E.A. Jordet and S.E. Jakobsen
   Abstract