Fédération internationale du béton

PDF
Precast segmental bridgesPartial factor methods for existing concrete structures

Punching shear of structural concrete slabs81
View Full-Size Image


Punching shear of structural concrete slabs81

Price: CHF140.00


-

fib Bulletin No. 81

Title: Punching shear of structural concrete slabs

Category: Technical report

Year: 2017

Pages: 378

Format approx. DIN A4 (210x297 mm)

ISBN: 978-2-88394-121-2

Abstract:

fib Bulletin 81 reports the latest information available to researchers and practitioners on the analysis, design and experimental evidence of punching shear of structural concrete slabs. It follows previous efforts by the International Federation for Structural Concrete (fib) and its predecessor the Euro-International Committee for Concrete (CEB), through CEB Bulletin 168, Punching Shear in Reinforced Concrete (1985) and fib Bulletin 12, Punching of structural concrete slabs (2001), and an international symposium sponsored by the punching shear subcommittee of ACI Committee 445 (Shear and Torsion) and held in Kansas City, Mo., USA, in 2005.

This bulletin contains 18 papers that were presented in three sessions as part of an international symposium held in Philadelphia, Pa., USA, on October 25, 2016. The symposium was co-organized by the punching shear sub-committee of ACI 445 and by fib Working Party 2.2.3 (Punching and Shear in Slabs) with the objectives of not only disseminating information on this important design subject but also promoting harmonization among the various design theories and treatment of key aspects of punching shear design. The papers are organized in the same order they were presented in the symposium. The symposium honored Professor Emeritus Neil M. Hawkins (University of Illinois at Urbana-Champaign, USA), whose contributions through the years in the field of punching shear of structural concrete slabs have been paramount.

The papers cover key aspects related to punching shear of structural concrete slabs under different loading conditions, the study of size effect on punching capacity of slabs, the effect of slab reinforcement ratio on the response and failure mode of slabs, without and with shear reinforcement, and its implications for the design and formulation in codes of practice, an examination of different analytical tools to predict the punching shear response of slabs, the study of the post-punching response of concrete slabs, the evaluation of design provisions in modern codes based on recent experimental evidence and new punching shear theories, and an overview of the combined efforts undertaken jointly by ACI 445 and fib WP 2.2.3 to generate test result databanks for the evaluation and calibration of punching shear design recommendations in North American and international codes of practice.

Download the copyright page (= list of authors) as a PDF file.

Download the table of contents as a PDF file.







Your Shopping Cart

Your Cart is currently empty.


FB

Follow us on  YouTube 

Postal address

Case Postale 88
CH-1015 Lausanne
Switzerland

Street address

Office GC A2 424
at the Swiss Federal Institute of Technology Lausanne (EPFL)

Contact us

Phone +41 21 693 2747
Fax +41 21 693 6245
Email: click here