No. 1, March 2010 - Contents
- Editorial
L. Taerwe and S. Helland - Editorial
J. Toscas - Belgrade's Delta City shopping mall - design and construction
S.B. Marinkovic, V.M. Kokovic, I.S. Ignjatovic and V.H. Alendar
Abstract - In-field performance of North Sea offshore platforms with regard to chloride resistance
S. Helland, R. Aarstein and M. Maage
Abstract - Unconventional cable-stayed bridges: structural behaviour and design criteria
A.M. Ruiz-Teran
Abstract - Span-to-height ratio limits for prestressed concrete members
P.G. Debernardi and M. Taliano
Abstract - Erratum
No. 2, June 2010 - Contents
- Editorial
S. Helland - Standards: a system of tools for the construction industry - interface and interaction between standards
S. Leivestad and J. Mehus
Abstract - Non-linear finite-element modelling of reinforced concrete deep beams
A.H. Alwathaf
Abstract - Concrete gravity-based structures used for offshore LNG storage and regasification in the Adriatic Sea
J. Naess, S.I. Giske and L. Bjerkeli
Abstract - Concrete in high-rise buildings: practical experiences in Madrid
H. Corres Peiretti and M. Gómez Navarro
Abstract - Flexure-controlled ultimate deformations of members with continuous or lap-spliced bars
D. Biskinis and M.N. Fardis
Abstract
No. 3, September 2010 - Contents
- Anchorage of composite laminates in RC flexural beams
F. Micelli, A. Rizzo and D. Galati
Abstract - Deformations at flexural yielding of members with continuous or lap-spliced bars
D. Biskinis and M. N. Fardis
Abstract - Experimental investigations of partially-damaged RC beams and columns
A. D. Pullen and A. A. Abbas
Abstract - Deformation of continuous reinforced concrete beams during patch repair
J. Cairns and E. Coakley
Abstract - Study of underwater concrete using two-stage (preplaced aggregate) concrete in Libya
H. S. Abdelgader, M. F. Najjar and T. M. Azabi
Abstract
No. 3, December 2010 - Contents
- Editorial
P. Lenkei - Torsion strengthening of RC beams with carbon fibre composites
J. J. Holtz Silva Filho, E. de Souza Sánchez Filho and M. de Souza Lima Velasco
Abstract - Strength properties of HPC using binary, ternary and quaternary cementitious blends
K. Chinnaraju, K. Subramanian and S. R. R. Senthil Kumar
Abstract - Flowable high-strength system as repair material
E. T. Dawood and M. Ramli
Abstract - Punching of RC slabs under eccentric loads
M. Farzam, N. A. Fouad, J. Grünberg and M. Y. Fard
Abstract - Utilisation of olive waste ash in mortar mixes
N. M. Al-Akhras and M. Y. Abdulwahid
Abstract - Discussion: Failure analysis of hollow-core slabs tested in shear
G. Bertagnoli and G. Mancini

